CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
58
❑
Subwoofer Phase
Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the
subwoofer phase.
Settings
❑
Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
• This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”.
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Default
Front L, Front R, Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.6 ft)
Surround L, Surround R: 2.40 m (8.0 ft)
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
Front L, Front R, Subwoofer: 0.0 dB
Others: -1.0 dB
■
Equalizer
Adjusts the tone with an equalizer.
❑
EQ Select
Selects the type of equalizer to be used.
Settings
• “PEQ” is available only when the YPAO has been performed (p.29).
■
Manual equalizer adjustment
1
Set “EQ Select” to “GEQ”.
2
Use the cursor keys (
q
/
w
) to select “Channel” and the cursor keys (
e
/
r
) to select
the desired speaker channel.
Normal (default)
Does not reverse the subwoofer phase.
Reverse
Reverses the subwoofer phase.
Off (default)
Depending on the size of the front speakers, either the subwoofer or
front speakers produce the front channel low-frequency components.
On
Both the front speakers and subwoofer produce the front channel low-
frequency components.
PEQ
Applies the parametric equalizer values obtained by the YPAO
measurement (p.29).
GEQ (default)
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
Off
Does not use the equalizer.
