Yamaha RX-V375 Owner'S Manual Download Page 44

Page: 44 / 84

PLAYBACK

➤

Playing back iPod music

You can play back iPod music on the unit using a USB cable
supplied with the iPod.

• An iPod may not be detected by the unit or some features may not be compatible,

depending on the model or software version of the iPod.

• To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied)

is required. Connect the USB and composite video plugs of the Apple Composite
AV cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit, and connect
your TV and the unit with a video pin cable (p.22).

Connecting an iPod

Connect your iPod to the unit with the USB cable supplied with the
iPod.

Connect the USB cable to the iPod.

Connect the USB cable to the USB jack.

• The iPod charges while it is connected to the unit. If you set the unit to

standby mode while the iPod is connected, the iPod continues to charge (up
to 4 hours).

• Disconnect the iPod from the USB jack when it is not in use.

Playing back iPod music

Supported iPod (as of December 2012)

• iPod touch (1st, 2nd, 3rd and 4th generation)

• iPod classic

• iPod nano (2nd, 3rd, 4th, 5th and 6th generation)

• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone

VIDEO

VOLUME

AUX

STRAIGHT

RADIO

VIDEO

AUDIO

The unit (front)

VOL.

iPodConnected

USB

Summary of Contents for RX-V375





















































































Search results

Summary of Contents for RX-V375

Reviews:

Related manuals for RX-V375

Brands by name

Popular brands

Yamaha RX-V375, Owner'S Manual

Search results

Summary of Contents for RX-V375

Reviews:

Related manuals for RX-V375

Brands by name

Popular brands