En
40
SETUP
Configuring the settings specific for each input source (Option menu)
■
Adjusting volume between input sources
Input source:
All
Reduces any change in volume when switching between input
sources by correcting volume differences in each input source. You
can adjust this parameter for each input source.
■
Combining HDMI/AV1-2 input source
video and audio
Input source:
HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
–
an external device is connected with an HDMI cable but cannot
transmit audio through HDMI
–
an external device with component video output and analog audio
output (such as certain game consoles) are connected to the
system
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
■
Displaying information on audio/video
signals
Input source:
HDMI1-4, AV1-4
J
1
Displays information on digital audio and video signals on the
front panel display. You can display the signal information by
pressing
i
ENTER
on the menu item and using
i
Cursor
B
/
C
.
Audio information
Video information
Volume Trim
Adjustable range
-6.0 dB to 0.0 dB to +6.0 dB
Default setting
0.0 dB
Adjustment
increments
0.5 dB steps
Audio In
SW
C
L
SL
SR
R
Audio
;;;;;;
AV1
HDMI1
VOL.
Assignable audio input jacks
Inputs that change the audio source
Audio inputs
Settings method
Optical digital audio
input
Select AV1 or AV4. Connect the external component
audio cable to the optical jack for the selected input.
Coaxial digital audio
input
Select AV2 or AV3. Connect the external component
audio cable to the coaxial jack for the selected input.
Analog audio input
Select one of AV5, AUDIO1, or AUDIO2. Connect
the external component audio cable to the audio jack
for the selected input.
•
For details of settings, refer to “Receiving audio from other input
) and “Component connections to analog audio
•
To return audio inputs to their previous settings, display this item
again, and select the original input jack.
Signal Info
SW
C
L
SL
SR
R
DolbyD
FORM
A
T
VOL.
Menu item
Information
FORMAT
Format of audio signals.
CHAN
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, “3/2/0.1” is
displayed.
If a channel that cannot be expressed as the above is
input, a total number of channels such as “5.1ch” may
be displayed.
SAMPL
The sampling frequency of analog-to-digital
conversion.
B RATE
The bit rate of input signal per second.
V IN
Format and resolution of video input signal.
V OUT
Format and resolution of video output signal.
V.MSG
(appears only
when an error
has occurred)
Error messages about HDMI signals and components.
Error message
HDCP Error
HDCP authentication failed.
Device Over
The number of connected HDMI
components is over the limit.
•
“No Signal” is displayed when no signals are being received,
and “---” is displayed if this unit cannot recognize the incoming
signal.
•
The bit rate may vary during playback.
J
1 :
AV5 or AUDIO1-2 are also available when the “Audio Return Channel”
function is on, and the source is used for the TV audio input (TVAudio).
