En
10
CONNECTIONS
Connecting speakers
Speaker layout
5.1-channel speaker layout (5 sp subwoofer)
Connecting speakers
Connect your speakers to their respective terminals on the rear panel.
•
Connect at least two speakers (front left and right).
•
If you cannot connect all five speakers, give priority to the surround speakers.
•
The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.
■
CRT monitors
We recommend that you use magnetically shielded speakers to avoid video distortion, especially for
the front and center speakers near the screen.
If your screen still gets interference from magnetically shielded speakers, move the speakers farther
away from your TV.
60
q
60
q
80
q
80
q
Front speaker R
Front speaker L
Center speaker
Surround speaker L
Surround
speaker R
Subwoofer
CAUTION
•
Remove the AC power cord of this unit from the power outlet before connecting the speakers.
•
Generally speaker cables consist of two parallel insulated cables. One of these cables is a different
color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)
cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”
(minus, black) terminal.
•
Be careful that the core of the speaker cable does not touch anything or come into contact with the metal
areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,
“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on.
ANTENNA
FM
GND AM
AUDIO 2
CENTER
SURROUND
HDMI 4
FRONT
OR OUT
SUBWOOFER
AUDIO
OUT
SPEAKERS
Surround speaker
Front speaker
Subwoofer
Center speaker
R
L
R
L
