En
44
SETUP
Setting various functions (Setup menu)
■
Adjusting sound quality with the equalizer
Adjusts sound quality and tune with a graphic equalizer.
EQ Select
Turns the graphic equalizer on or off. By selecting GEQ and
pressing
j
ENTER
, you can adjust the characteristics of the
graphic equalizer.
■
Generating test tones
Turns the test tone generator on or off.
Equalizer
GEQ
(Default)
Uses the graphic equalizer to adjust sound quality.
Off
Does not activate the equalizer.
■
Adjusting the graphic equalizer
1
When “EQ Select” is displayed, use
j
Cursor
D
/
E
to select “GEQ” and press
j
ENTER
.
2
Check that “Channel” appears and use
j
Cursor
D
/
E
to select the speaker for which you want to
adjust the equalizer.
SW
C
L
SL
SR
R
Channel
;
FRNT
L
G
E
Q
VOL.
The speaker you are adjusting
3
Press
j
Cursor
C
repeatedly to select the
frequency you want to adjust, then use
j
Cursor
D
/
E
to adjust the volume.
Raising volume:
Press
j
Cursor
E
.
Lowering volume: Press
j
Cursor
D
.
4
When you have finished making adjustments,
press
i
SETUP
to close the Setup menu.
SW
C
L
SL
SR
R
63Hz
G
E
Q
VOL.
Frequency band
Setting the volume level for
the selected frequency
Frequency
range
63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/
16 kHz
Adjustable
range
-6.0 dB to +6.0 dB
Default setting
0 dB
Adjustment
increments
0.5 dB
You can use
j
Cursor
B
/
C
to select another frequency or
return to step 2. Repeat steps 2-3 to adjust the tone to your
liking.
Test Tone
Off
(Default)
Does not generate test tones.
On
Generates test tones. While “On” is selected, test
tones are produced constantly.
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
graphic equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.
