En
60
Measuring at multiple listening positions
(multi measure)
Follow the procedure below to take a measurement when the “Multi
Measure” box is checked. It takes about 15 minutes to measure 8
listening positions.
Y
• If any error message (such as ERROR 1) or warning message (such as WARNING 1)
appears, see “Error messages” (p.64) or “Warning messages” (p.65).
• Do not use the microphone base until the corresponding message appear on the TV.
1
To start the measurement, use the cursor keys to select
“Start” and press ENTER.
The measurement will start in 10 seconds. Press ENTER again to
start the measurement immediately.
X
To cancel the measurement temporarily, press RETURN or VOLUME keys.
The following screen appears on the TV when the measurement at
the first position finishes.
2
Move the YPAO microphone to the next listening position
and press ENTER.
Repeat step 2 until measurements at all listening positions (up to
8) have been taken.
3
When the measurements at the positions you want to
measure are completed, use the cursor keys to select
“Skip” and press ENTER.
When you have taken measurements at 8 listening positions, the
following screen appears automatically.
(when angle/height measurement is disabled)
Proceed to Step 5.
(when angle/height measurement is enabled)
Proceed to Step 4.
TUNING
BAND
TUNING
MEMORY
STRAIGHT
VOLUME
ENHANCER
SUR. DECODE
AI
PROGRAM
POP-UP
/MENU
HOME
TOP
MENU
BLUE
YELLOW
GREEN
RED
PRESET
BLUETOOTH
NET
USB
TUNER
INPUT
8
7
6
5
4
3
2
1
SCENE
HDMI OUT
PURE DIRECT
PARTY
MAIN 2 3 4
ZONE
SLEEP
TUNING
BAND
TUNING
MEMORY
STRAIGHT
VOLUME
ENHANCER
SUR. DECODE
AI
PROGRAM
POP-UP
/
/MENU
HOME
TOP
MENU
BLUE
YELLOW
GREEN
RED
PRESET
BLUETOOTH
NET
USB
TUNER
INPUT
8
7
6
5
4
3
2
1
SCENE
HDMI OUT
PURE DIRECT
PARTY
TT
MAIN 2 3 4
ZONE
SLEEP
RETURN
ENTER
Cursor keys
