Yamaha RX-V3085 Owner'S Manual Download

Page: 160 / 190

160

Updating the unit’s firmware via the network

New firmware that provides additional features or product

improvements will be released as needed. If the unit is connected to the

Internet, you can download the firmware via the network and update it.

• The firmware update indicator (p.15) on the front display lights up when a firmware

update is available via the network.

• You can also update the firmware using the USB memory device from the “ADVANCED

SETUP” menu (p.159).

• You can also start the firmware update by pressing INFO on the front panel.

A firmware update is available if the following message is displayed after

SETUP is pressed.

Updating the unit’s firmware

Read the on-screen description.

Use the cursor keys to select “START” and press ENTER.

The on-screen display turns off and the firmware update begins.

If “UPDATE SUCCESS PLEASE POWER OFF!” appears on

the front display, press MAIN ZONE

on the front panel.

The firmware update is complete.

• If you want to cancel without doing anything now, select “CLOSE”.

• Firmware update takes about 20 minutes or more.

• You might not get the message or the lighting up firmware update indicator on the

front display depending on the condition of the network connection. In this case,

update the firmware using the USB memory device (p.159).

• For details on update, visit the Yamaha website.

• To perform the update when turning off the unit, select “LATER” in step 2, and then

follow the on-screen instructions. When a screen to confirm the firmware update

appears after turning off the unit, press ENTER to start the firmware update.

When the firmware update is complete, the unit enters standby mode automatically.

• To perform the update when turning off the unit, refer to the following instructions.

– The firmware update can be started by pressing INFO on the front panel.

– The unit turns off automatically without performing the firmware update if two

minutes pass after the screen to confirm the firmware update is displayed.

– To cancel the firmware update process, press RETURN, and the unit will turn off.

– The unit turns off without performing the firmware update if you turn off the unit

with AV CONTROLLER or MusicCast CONTROLLER.

Note

• Do not operate the unit or disconnect the power cable or network cable

during firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).

• If the unit is connected to the wireless network, network update may not be

possible depending on the condition of the wireless connection. In this case,
update the firmware using the USB memory device (p.159).

• For details on update, visit the Yamaha website.

TUNING

BAND

TUNING

MEMORY

STRAIGHT

VOLUME

ENHANCER

SUR. DECODE

PROGRAM

POP-UP

/MENU

HOME

TOP

MENU

BLUE

YELLOW

GREEN

RED

PRESET

BLUETOOTH

NET

USB

TUNER

INPUT

SCENE

HDMI OUT

PURE DIRECT

PARTY

MAIN 2 3 4

ZONE

SLEEP

TUNING

BAND

TUNING

MEMORY

STRAIGHT

VOLUME

ENHANCER

SUR. DECODE

PROGRAM

POP-UP

/MENU

HOME

TOP

MENU

BLUE

YELLOW

GREEN

RED

PRESET

BLUETOOTH

NET

USB

TUNER

INPUT

SCENE

HDMI OUT

PURE DIRECT

PARTY

MAIN 2 3 4

ZONE

SLEEP

RETURN

SETUP

ENTER

Cursor keys

Summary of Contents for RX-V3085































































































































































































Search results

Summary of Contents for RX-V3085

Reviews:

Related manuals for RX-V3085

Brands by name

Popular brands

Yamaha RX-V3085, Owner'S Manual

Search results

Summary of Contents for RX-V3085

Reviews:

Related manuals for RX-V3085

Brands by name

Popular brands