Yamaha RX-V3075, Owner'S Manual

Page: 90 / 169

PLAYBACK
➤
Playing back videos/audio in multiple rooms (multi-zone)
En
90
■
Connecting an HDMI-compatible device to
play back videos/audio
Connect an HDMI-compatible device (such as a TV) to play back
videos/audio at Zone2 or Zone4. If you connect an AV amplifier, you
can enjoy multi-channel playback in another room (Zone4).
• To watch videos played back on a video device at Zone2 or Zone4, you need to
connect the video device to the unit with an HDMI cable (p.41).
• We recommend that you disable HDMI Control on the playback devices connected
to the unit.
• On-screen operations are not available for Zone4.
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2 or Zone4, set
“HDMI OUT2 Assign” (p.124) in the “Setup” menu to “Zone2” or “Zone4”.
• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can
enable/disable the audio output from the HDMI OUT 2 jack by setting “Audio
Output” (p.124) in the “Setup” menu to “On” or “Off” (default).
• You can also use speakers placed in Zone2 to output audio (p.32).
ETWORK
( 3 NET )
MONITOR OUT/
ZONE OUT
HDMI OUT
ARC (ZONE OUT)
1 2
(1 BD/DVD)
AV 1 AV 2 A
Y P B P R Y P B
AV 1
AV 3
COMPONENT VIDEO
A
AV 2
B
AV 4
AV OUT
AV 3 AV 4 2
OPTICAL
4
OPTICAL
3
AXIAL OPTICAL
AUDIO 4 MULTI CH INPUT AUDIO 3 AUDIO 2 AUDIO 1
(2 TV) CENTER
SUBWOOFE FRONT SURROUND SUR. BACK
SURROUND BACK SURROUND
R
5
COAXIAL
6
R L
SIN
FM 75 Ω
ANTENNA
AM
(4 RADIO)
HDMI
HDMI
OUT
(ZONE OUT)
2
HDMI
HDMI
HDMI
The unit (rear)
HDMI OUT 2
(ZONE OUT) jack
Zone4 Main zone
HDMI input
(Example: using a TV)
HDMI input
(Example: using an AV amplifier)
Zone2 or Zone4
• Videos/audio interruptions may happen in another zone when any of the
following operations is performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings (such as “Extended Surround”)