Yamaha RX-V3075, Owner'S Manual

Page: 88 / 169

PLAYBACK
➤
Playing back videos/audio in multiple rooms (multi-zone)
En
88
Preparing the multi zone system
Connect the device that will be used in other rooms to the unit.
■
Connecting speakers to play back audio
Connect speakers to play back audio in Zone2 or Zone3. The
connection method varies depending on the amplifier being used
(the unit or an external amplifier).
❑
Using the unit’s internal amplifier
Connect the speakers placed in Zone2 or Zone3 to the unit with
speaker cables. For details, see “Connecting Zone2/3 speakers”
(p.32).
❑
Using an external amplifier
Connect the external amplifier placed in Zone2 or Zone3 to the unit
with a stereo pin cable and connect speakers to the external
amplifier.
• (RX-V3075 only)
You cannot use an external amplifier for Zone2 when the ZONE OUT/PRE OUT
jacks are set to output front presence channel audio in “Power Amp Assign”
(p.111) in the “Setup” menu. Also, you cannot use an external amplifier for Zone3
when the ZONE OUT/PRE OUT jacks are configured to output rear presence
channel audio.
Caution
• Remove the unit’s power cable from the AC wall outlet before connecting
speakers or an external amplifier.
• Ensure that the core wires of the speaker cable do not touch one another or
come into contact with the unit’s metal parts. Doing so may damage the unit
or the speakers. If the speaker cables short circuit, “Check SP Wires” will
appear on the front display when the unit is turned on.
DMI OUT
(ZONE OUT)
2
HDMI
(1 BD/DVD)
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6
Y P
B
P
R
Y P B P R
Y P
B
P
R
MONITOR OUT/ZONE OUT
IN
AV 1
AV 3
1
COMPONENT VIDEO
A
AV 2
B
C
AV 4
D
AUDIO 4 MULTI CH INPUT
ZONE OUT/PRE OUT
AUDIO 3
CENTER
SUBWOOFER
ZONE 2 /
F.PRESENSE
ZONE 3 /
R.PRESENSE
FRONT SURROUND SUR. BACK
SPEAKERS
CENTE SURROUND BACK SURROUND
ZONE 2/ZONE 3/R.PRESENCE
R L R L
R L
SINGLE
PRE OUT
SU
FRONT SURROUND SUR. BACK
(SINGLE) (
(
EXTRA SP2
ZONE OUT/PRE OUT
ZONE 2 /
F.PRESENSE
ZONE 3 /
R.PRESENSE
L
R
L
R
AUDIO
The unit (rear)
ZONE OUT
(ZONE 2 or ZONE 3) jacks
Zone2 or Zone3
Main zone
External amplifier
Audio input
(analog stereo)