SETUP
Setting various functions (Setup menu)
En
96
Distance
Adjusts the timing at which the speakers produce audio
so that sounds from the speakers reach the listening
position at the same time.
Selecting adjustment units
Use
i
Cursor
B
/
C
to select the unit for distance
(meters or feet), and press
i
ENTER
.
Setting distances for each speaker
Use
i
Cursor
B
/
C
to select the speaker you want to
configure, and press
i
ENTER
.
Then use
i
Cursor
D
/
E
to set the distance from the
speaker to your listening position.
Level
Separately adjusts the volume of each speaker.
Use
i
Cursor
B
/
C
to select the desired speaker, and
press
i
ENTER
.
Then use
i
Cursor
D
/
E
to adjust the volume for the
selected speaker.
Parametric EQ
Adjusts sound quality of tone using a parametric
equalizer.
PEQ Select
Select an equalizer type.
PEQ Data Copy
Select 1 of the 3 parametric equalizer types acquired with
automatic setup and manually copy that information to the
manual adjustments.
Front L / Front R / Center / Surround L / Surround R /
Surround Back L / Surround Back R / Front Presence L /
Front Presence R / Subwoofer1 / Subwoofer2
The parametric equalizer can be used to manually adjust
sound quality for individual speakers.
Set “PEQ Select” to “Manual” and use “PEQ Data
Copy” to copy information acquired with automatic
setup. This information can be used as a basis for
performing manual adjustments.
1
Use
i
Cursor
B
/
C
repeatedly to select
“Band / Gain,” “Freq. / Gain,” or “Q / Gain”
and press
i
ENTER
.
2
Use
i
Cursor
D
/
E
repeatedly to adjust the
parameter and use
i
Cursor
B
/
C
repeatedly to adjust the gain.
3
Press
i
ENTER
to exit the edit window.
4
Repeat steps 1 to 3 to configure other
parameters.
5
Press
h
ON SCREEN
to close the menu.
ON SCREEN
ENTER
LEVEL
SOURCE
RECEIVER
AV
AUDIO
4
3
1
2
7
5
6
V-AUX
4
3
1
2
USB
MULTI
NET
PHONO
TUNER
DOCK
TUN./CH
[ B ]
[ A ]
i
z
h
Adjustable range
0.30 m to 24.00 m (1.0 ft. to 80.0 ft.)
Default setting
3.00 m (10.0 ft.)
Adjustment
increments
0.05 m (0.2 ft.)
Adjustable range
-10.0 dB to +10.0 dB
Default setting
0.0 dB
Adjustment
increments
0.5 dB
You can also adjust the volume of each speaker by
using
z
LEVEL
.
Press
z
LEVEL
and use
i
Cursor
B
/
C
to select
the desired speaker. Then use
i
Cursor
B
/
C
to
adjust the volume for the selected speaker.
Manual
Manually adjust equalizer sound.
Flat
Adjust individual speakers to achieve the
same characteristics. Select this option if
speakers offer the same quality.
Front
Adjust individual speakers to achieve the
same characteristics as the front left and
right speakers. Select this option if front
left and right speakers offer significantly
greater quality than other speakers.
Natural
Adjust all speakers to achieve a natural
sound. Select this if high-frequency
sounds seem too strong when “PEQ
Select” is set to “Flat.”
Through
(Default)
Disable the equalizer.
Flat
Manual
Copy the “Flat” parametric equalizer
information acquired with automatic
setup.
Front
Manual
Copy the “Front” parametric equalizer
information acquired with automatic
setup.
Natural
Manual
Copy the “Natural” parametric equalizer
information acquired with automatic
setup.
To reset all parameter settings for the selected
speaker, select “Yes” in “Reset” and press
i
ENTER
.
