74
En
Advanced setup
Two IDs are provided for the remote control of this unit. If
another Yamaha amplifier is in the same room, setting a
different remote control ID to this unit prevents unwanted
operation of the other amplifier.
“ID1” is set for both the main unit and remote control by
default. If you have changed the remote control ID, make
sure that you select the same ID for the main unit in the
the advanced setup menu.
y
•
For details on how to set the remote control ID of the simplified remote
control, see page 8.
1
Press
o
CODE SET
on the remote control
using a pointed object such as the tip of a
ballpoint pen.
n
TRANSMIT
blinks twice.
2
Press
i
ON SCREEN
.
3
Enter the desired remote control ID code.
To switch to ID1, press
l
Numeric keys
to enter
“5019”.
To switch to ID2, press
l
Numeric keys
to enter
“5020”.
Once the remote control code is registered,
n
TRANSMIT
blinks twice.
If it fails,
n
TRANSMIT
blinks six times. Repeat
from step 1.
y
•
If you initialize the settings of this unit, “REMOTE ID” (remote control
code of this unit) is set to “ID1”.
Setting a remote control ID
