Yamaha RX-V1900BL Owner'S Manual Download Page 60

Page: 60 / 146

XM® Satellite Radio tuning

Use this feature to display the XM Satellite Radio
information in the front panel display or in the OSD.

• You can configure the display settings with “DISPLAY SET”

(page 83).

• You can hold or release the displayed information by pressing

ENTER

. While it is held, the HOLD indicator flashes in the

front panel.

• If a status message or an error message appears in the front

panel display or video monitor, see “XM Satellite Radio”
(page 109).

• The current XM Satellite Radio reception level appears on the

top of the XM Satellite Radio information screen. For the best
reception, adjust the orientation of the antenna of Home Dock

so that “

” or “

” is displayed here. “

” is displayed if

the antenna cannot receive the signals correctly. In this case,
adjust the orientation of the antenna (page 52).

■

Front panel display

Press

INFO

(or set the operation mode

selector to

AMP

and then press

INFO

)

repeatedly to toggle between the following XM
Satellite Radio information display modes.

Back to “

CATEGORY INFO

”

• If the XM Satellite Radio information contains a character that

cannot be recognized by this unit, the character will be
displayed with a space.

• When the antenna of the XM Mini-Tuner Home Dock cannot

receive the signals, “NO SIGNAL” appears in the front panel
display.

■

Video monitor (OSD)

Press

DISPLAY

on the remote control to turn

on or off the information display.

The following information is displayed in the OSD.

[1] Search mode (page 53)

[2] Channel category

[3] Song title

[4] Antenna reception level

[5] Channel number, channel name

[6] Artist name

Before performing the following operations, set the operation
mode selector on the remote control to

SOURCE

and then

press

Displaying the XM Satellite Radio
information

Notes

CATEGORY INFO

Channel category, channel number, channel name

SONG INFO

Artist name, song title, channel number, channel name

ANTENNA INFO

Antenna reception level, channel number, channel name

DSP PROG. INFO

Sound field program

INPUT INFO

Input source, channel number, channel name

XMANT:

ALLCHSEARCH

043:XMU

:Rock
:Coldplay
:Speedofsound

[1]

[2]

[4]

[5]

[6]

[3]

Summary of Contents for RX-V1900BL



















































































































































Search results

Summary of Contents for RX-V1900BL

Reviews:

Related manuals for RX-V1900BL

Brands by name

Popular brands

Yamaha RX-V1900BL, Owner'S Manual

Search results

Summary of Contents for RX-V1900BL

Reviews:

Related manuals for RX-V1900BL

Brands by name

Popular brands