Yamaha RX V1900 - AV Receiver, Owner'S Manual

Page: 91 / 146

8 7
En
Saving and recalling the system settings (SYSTEM MEMORY)
AD
V
ANCED
OPERA
T
ION
English
6
Press
H
MENU
to exit from “SET MENU”.
If you load the system settings, the settings currently configured
are overwritten. If you do not want to erase the current settings,
save the settings using the SYSTEM MEMORY feature in
advance.
■
Loading by the
6
SYSTEM MEMORY
buttons
You can recall the system settings stored in “MEMORY1”
to “MEMORY4” by pressing the corresponding
6
SYSTEM MEMORY
buttons.
1
Press one of the
6
SYSTEM MEMORY
buttons on the remote control to select the
desired memory number.
“MEMORY 1 LOAD” (example) appears in the front
panel display.
y
“EMPTY” appears in the menu screen if no system
settings are stored in the selected memory number.
2
Press the selected
6
SYSTEM MEMORY
button once more to confirm the selection.
This unit loads the settings stored in the selected
memory number.
■
Loading by the SET MENU operation
1
Set the operation mode selector on the
remote control to
E
AMP
and then press
H
MENU
.
The top “SET MENU” display appears in the OSD.
2
Press
8 n
to select “SYSTEM MEMORY” and
then press
8
ENTER
.
The “SYSTEM MEMORY” menu appears.
3
Press
3
ENTER
to select “LOAD”.
The current system settings are displayed.
4
Press
8
l
/
h
repeatedly to select the
desired memory number where the system
settings are stored and then press
8
ENTER
.
This unit loads the selected system settings.
5
Press
H
MENU
to exit from “SET MENU”.
Loading the system settings
Note
4 3
SYSTEM MEMORY
2 1
[
p
]/[
[
]:
[ENTER]:
SYSTEM MEMORY
LOAD ;;;;;;; CURRENT
Church in Freiburg
ADAPTIVE DRC ;; AUTO
EQUALIZER ;;;;;; PEQ
PEQ TYPE ;;; NATURAL
Select
Return
.
[
p
]/[
[
]:
[ENTER]:
SYSTEM MEMORY
LOAD ;;;;;;; MEMORY6
Straight
ADAPTIVE DRC ;; AUTO
EQUALIZER ;;;;;; PEQ
PEQ TYPE ;;;;;; FLAT
Select
Load
.