Yamaha RX V1900 - AV Receiver, Owner'S Manual

Page: 64 / 146

60
En
SIRIUS Satellite Radio™ tuning
You can use this feature to store up to 40 SIRIUS Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
(page 54).
1
Search for a channel you want to set as a
preset channel by using one of the SIRIUS
Satellite Radio search modes.
For details, see “SIRIUS Satellite Radio™
operations” (page 58).
2
Press H
MEMORY
(or
9
MEMORY
).
The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.
y
• To store the selected channel under an empty preset
number automatically, press and hold
H
MEMORY (or
9
MEMORY ) for more than 2 seconds instead of step 2.
In this case, the following steps are unnecessary.
• To cancel the preset operation, press
H
MEMORY (or
9
MEMORY ) again.
3
To select the preset channel group and
number (A1 to E
8 ), press
G
PRESET/
TUNING/CH
l
/
h
(or
8
CAT./A-E
l
/
h
and
8
PRESET/CH
k
/
n
) repeatedly.
• To select a higher preset channel group and
number, press G
h
(or
8 k
).
• To select a lower preset channel group and number,
press G
l
(or
8 n
).
y
• You can also select a preset number (1 to 8) by pressing
the numeric buttons (
A
).
• If you select a preset number being used ("*" appears next
to the preset number), the current preset channel will be
overwritten.
4
Press
F
ENTER
(or
8
ENTER
).
The preset channel is set and the PRESET indicator
disappears.
■
Clearing preset channels
You can clear the assignments of preset SIRIUS Satellite
Radio channels.
1
Select the preset SIRIUS Satellite Radio
channel to clear.
For details, see “Preset Search mode” (page 59).
2
Press and hold I
SEARCH MODE
(or
H
SRCH MODE
) until “CLEAR?” appears in
the front panel display.
3
Press F
ENTER
(or
8
ENTER
) to clear the
preset channel.
To cancel the operation, press
I SEARCH MODE
(or
H
SRCH MODE ).
Before performing the following operations, set the operation
mode selector on the remote control to
E
SOURCE
and then
press
3
SIRIUS
.
Setting the SIRIUS Satellite
Radio™ preset channels
0 0 1 S I R I U S H i t
Channel number
PRESET M E M O R Y A 1
0 0 1 S I R I U S H I T
Lights up