32
En
Optimizing the speaker setting for your listening room
6
Press
8
l
/
h
repeatedly to toggle between
the setup result displays.
Press
8
k
/
n
to toggle between the parameters in the
result.
y
• If you are not satisfied with the results or want to manually
adjust each parameter, use “MANUAL SETUP”
(page 74).
• You can select the parametric equalizer type with “PEQ
SELECT” (page 79).
• The distances displayed in the “DISTANCE” results may
be longer than the actual distance depending on the
characteristics of your subwoofer or external amplifiers if
you connect them.
• In the “EQ” results, different values may be set for the
same band to provide finer adjustments.
7
Press
8
ENTER
to return to the top result
display.
8
Press
8
l
/
h
to select “SET” or “CANCEL”
and then press
8
ENTER
.
Choices:
SET
, CANCEL
• Select “SET” to confirm the “AUTO SETUP”
results.
• Select “CANCEL” to cancel the “AUTO SETUP”
results.
9
Disconnect the optimizer microphone or
press
H
MENU
to exit from "SET MENU".
If you change speakers, speaker positions, or the layout of your
listening environment, run “AUTO SETUP” again to recalibrate
your system.
■
If an error screen appears
Press
8
l
/
h
to select “RETRY” or “EXIT” and
then press
8
ENTER
The following screen is an example where “E-9:USER
CANCEL” appears in the OSD.
Choices:
RETRY
, EXIT
• Select “RETRY” to retry the “AUTO SETUP”
procedure.
• Select “EXIT” to exit from the “AUTO SETUP”
procedure.
y
• If “E-5:NOISY” appears, you can also select “PROCEED” to
Notes
Results of the speaker
connection and wiring
Results of the speaker distance
from the listening position
Results of the speaker detection
and size
Results of the parametric
equalizer of each speaker
Results of the speaker output
level
Number of the measured points
Note
[]/[]:
[ENTER]:
[
p
AUTO SETUP
RESULT
MLT :
1
SP
:
5/4/0.1
DIST:
14.0/17.0ft
LVL : -10.0/+5.0dB
>SET
CANCEL
Up/Down
Enter
.
[]/[]:
[ENTER]:
[
p
AUTO SETUP
RESULT
MLT :
1
SP
:
5/4/0.1
DIST:
14.0/17.0ft
LVL : -10.0/+5.0dB
>SET
CANCEL
Up/Down
Enter
.
[
p
]/[
[
]:
[ENTER]:
ERROR
E-9:USER CANCEL
Don't operate
any function
>RETRY
EXIT
Select
Enter
.
Summary of Contents for RX V1900 - AV Receiver
Page 133: ......
