26
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
Note
This control is effective only for the sound from the main
speakers.
Adjusting the BASS and TREBLE controls
BASS
: Turn this knob clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this knob clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Note
These controls are effective only for the sound from the main
speakers.
Adjusting the subwoofer output level
If your audio system includes a subwoofer, and an amplifier
driving the subwoofer (or a subwoofer system including an
amplifier) is connected to the SUBWOOFER OUT terminal on
the rear of this unit, you can adjust the subwoofer output level
on this unit.
Adjustment can be made only by using the remote controller.
1
Press the DELAY/CENTER/REAR/SWFR key repeteadly
until “SWFR” appears in the display.
2
By continuously pressing the “+” or “–” side of the LEVEL
button, the level value changes continuously.
If you feel that bass tone is insufficient, increase the level,
and if you feel that bass tone is overly emphasized,
decrease the level.
Control range: MIN, –20 to 0 dB
DELAY/CENTER
/REAR/SWFR
LEVEL
–
+
Adjustable
BALANCE
L
R
BASS
TREBLE
0
–
+
0
–
+
m
Sound control
