PLAYBACK
➤
Playing back music in multiple rooms (multi-zone)
En
88
■
Other operations for Zone2
The following functions are also available when Zone2 is enabled.
Adjusting the volume
Press VOLUME or MUTE.
Selecting the input source and settings at once (SCENE)
Press SCENE.
• To register the current settings (input source, volume and tone control) to a scene,
hold down the desired SCENE key until “SET Complete” appears on the front
display.
Setting the sleep timer
Press SLEEP repeatedly to set the time (120 min, 90 min, 60 min, 30
min, off).
Adjusting the high-/low-frequency range of sounds
a
Press ZONE CONTROL on the front panel.
b
Press TONE/BALANCE repeatedly to select “Treble” or “Bass”.
c
Press PROGRAM to make an adjustment.
Setting range
-10.0 dB to +10.0 dB (2.0 dB increments)
Default
0.0 dB
Adjusting the Zone2 front speaker balance
a
Press ZONE CONTROL on the front panel.
b
Press TONE/BALANCE repeatedly to select “Balance”.
c
Press PROGRAM to make an adjustment.
• When “HDMI OUT2 Assign” (p.119) in the “Setup” menu is set to “Zone2”, the
following functions are not available.
– Adjusting the volume, high/low-frequency sound and front speaker balance
– Registering the volume and tone control settings to a scene
■
Enjoying the same source in multiple
rooms (party mode)
The party mode allows you to play back in Zone2 the same music
that is being played back in the main zone. During the party mode,
stereo playback is automatically selected for all zones. Utilize this
function when you want to use main zone music as background
music for a house party.
1
Press PARTY.
Each time you press the key, the party mode is turned on or
off.
When the party mode is turned on, “PARTY” lights up in the
front display.
• If the party mode does not work on Zone2, set “Party Mode Set” (p.119) in
the “Setup” menu to “Enable” (default).
• If “HDMI OUT2 Assign” (p.119) in the “Setup” menu is set to “Zone2”, Zone2
output is available only when an HDMI input is selected in the main zone.
S
LEEP
VOLUME
MUTE
S
CENE
PARTY
