PLAYBACK
➤
Playing back music in multiple rooms (multi-zone)
En
87
Controlling Zone2
1
Set MAIN/ZONE2 to “ZONE2”.
2
Press
z
(receiver power).
Each time you press the key, Zone2 is enabled or disabled.
When Zone2 is enabled, “ZONE2” lights up in the front
display.
3
Use the input selection keys to select an input
source.
• Video/audio signals that can be output to Zone2 vary depending on how you
connect the device in Zone2 to the unit’s output jacks. For details, see
“Multi-zone output” (p.144).
• You cannot select USB and network sources exclusively for each zone. For
example, if you select “SERVER” for Zone2 when “USB” is selected for the
main zone, the input source for the main zone also switches to “SERVER”.
4
Start playback on the external device or select a
radio station.
Refer to the instruction manual for the external device.
For details on the following operations, see the
corresponding pages.
• Listening to FM/AM radio (p.63)
• Playing back iPod music (p.67)
• Playing back music stored on a USB storage device
• Playing back music stored on media servers (PCs/NAS)
• Listening to Internet radio (p.77)
• Playing back music with AirPlay (p.80)
• The on-screen operations are not available for Zone2. Use the front display
or web control (p.89) to control Zone2.
• AirPlay is available in Zone2 only when AirPlay playback is ongoing in the
main zone.
Caution
• To avoid unexpected noise, never play back DTS-CDs in Zone2.
MAIN/ZONE2
z
Input selection keys
