Yamaha RX-V1077 Owner'S Manual Download Page 118

Page: 118 / 156

CONFIGURATIONS

➤

Configuring various functions (Setup menu)

118

Multi Zone

Configures the multi zone settings.

■

Main Zone Set

Configures the main zone setting.

Changes the zone name (for main zone) displayed on the front display or TV
screen.

■

Procedure

Press ENTER to enter the name edit screen.

Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.

• To clear the entry, select “CLEAR”.

Use the cursor keys to select “OK” and press ENTER.

• To restore the default setting, select “RESET”.

To exit from the menu, press ON SCREEN.

■

Zone2 Set

Configures the Zone2 settings.

Enables/disables volume adjustments for Zone2 output.

If you have connected an external amplifier with volume control to the unit, disable
volume adjustments for Zone2.

Settings

• This setting is not available when “Power Amp Assign” (p.108) is set to “7ch +1ZONE”.

Sets the Zone2 maximum volume to prevent excessive loudness.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

• This setting is available only when “Volume” is set to “Variable”.

Sets the Zone2 initial volume for when the unit is turned on.

Settings

• This setting is available only when “Volume” is set to “Variable”.

Zone Rename

Volume

Fixed

Disables volume adjustments for Zone2 output.

Variable

Enables volume adjustments for Zone2 output.

Max Volume

Initial Volume

Off

Sets the level at the volume level of the unit when it last entered standby
mode.

Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)

Summary of Contents for RX-V1077





























































































































































Search results

Summary of Contents for RX-V1077

Reviews:

Related manuals for RX-V1077

Brands by name

Popular brands

Yamaha RX-V1077, Owner'S Manual

Search results

Summary of Contents for RX-V1077

Reviews:

Related manuals for RX-V1077

Brands by name

Popular brands