70
En
Troubleshooting
If an operation takes longer than usual or an error occurs, one of the following messages may appear on the GUI screen.
In this case, read the cause and follow the corresponding remedies.
This unit cannot
select other audio
programs than the
main program.
The radio station provides one audio
program only.
HD Radio information
does not appear.
The radio station does not provide the
information.
iTunes Tagging (U.S.A. model only)
Problem
Cause
Remedy
See
page
Tag data cannot be
transferred to your
iPod when it is station
in the Yamaha iPod
universal dock (YDS-
10).
“YDS-10” does not support tag file
transfer.
Use “YDS-11” to transfer tag data from this unit to
your iPod.
—
Status message
Cause
Remedy
See
page
Insufficient Data
Tag data is not saved because of invalid
data.
The selected HR Radio program (or song being
played) does not support the iTunes Tagging feature.
—
Tag Already Stored
Tag data for the same content has been
already saved.
Tag Storage full
Tag data cannot be stored because the
internal memory of this unit is full.
Station your iPod in the Yamaha iPod universal dock
(YDS-11) connected to the DOCK terminal of this
unit.
—
iPod full
Tags cannot be stored
Tag data cannot be stored on your iPod
because the HDD space of your iPod is
full.
Delete unnecessary data from your iPod to make
room and try again.
—
Transferring Failed
Tag data cannot be transferred to your
iPod.
Check if the iPod is stationed in the Yamaha iPod
universal dock (YDS-11) properly.
—
Storing Tag
Tag data is being stored in the internal
memory of this unit.
Transferring
Tag data is being transferred to your iPod.
Tag(s)Sent
Tag data has been transferred to your
iPod.
XM Satellite Radio (U.S.A. model only)
Problem
Cause
Remedy
See
page
Status message
Cause
Remedy
See
page
CHECK XM TUNER
The XM Mini-Tuner is not installed in the
XM Mini-Tuner Home Dock or the XM
Mini-Tuner Home Dock is not connected
to this unit.
Confirm the XM Mini-Tuner is fully seated in the
dock and check the XM Mini-Tuner Home Dock
cable is connected to this unit.
