24
En
Playback
Press
Q
PURE DIRECT
(or
g
PURE DIRECT
)
to turn the Pure Direct mode on or off.
Q
PURE DIRECT
lights up when you set Pure Direct
mode on.
The following features are disabled in the Pure Direct
mode.
–
sound field program, tone control
–
display and operation of the Option menu and Setup
menu
–
multi-zone function
y
•
The font panel display automatically turns off while this unit in the Pure
Direct mode.
Plug your headphones in the
L
PHONES
jack on
the front panel.
When you select a sound field program while using the
headphones, the mode is automatically set to SILENT
CINEMA mode.
Notes
•
When you connect headphones, no signals are output at the speaker
terminals.
•
When multi-channel signals are processed, sounds in all channels are
divided to left and right channels. When “MULTI CH” is selected as the
input source, only front L/R sounds are output from the headphones.
When HDMI 1-4 or AV1-4 is selected as the input source,
you can display audio/video signal information.
y
•
Input signal information is displayed on both the GUI screen and front
panel display.
1
Select the desired input source and then
press
r
OPTION
on the remote control.
The Option menu for the selected input source is
displayed (page 47).
2
Press
j
Cursor
k
/
n
to select “Signal Info”
and then press
j
ENTER
.
Information on the input signal is displayed. See
page 48 for details about each information.
Note
•
If an HDMI related error occurs, error information is displayed at
the bottom of the screen.
3
To exit the Option menu, press
r
OPTION
.
Press
D
INFO
(or
f
INFO
) repeatedly.
Available information differs depending on the selected
input source.
For example, if you select HDMI1 input and display “DSP
Program”, the following screen appears on the front panel
display.
Note
•
Information marked with “*” is not available when analog HD Radio
station is selected.
Using your headphones
Displaying input signal information
Input
DSP
Dolby Dolby EX
3 / 2 / 0.1
96.0kHz
---
HDMI 480p
HDMI 1080p
HDCP Error
Signal Info
<Audio>
Format
Channel
Sampling Frequency
Bitrate
<Video>
Video In
Video Out
Message
HDMI 1
Straight
Changing information on the front
panel display
Input source
Information
HDMI1-4
AV1-6
AUDIO1/2
V-AUX
PHONO
iPod (DOCK) (simple
remote mode)
BLUETOOTH (DOCK)
Input
DSP Program
Audio Decoder
USB
iPod (DOCK) (menu
browse mode)
(on play information display)
DSP Program, Audio Decoder,
Song, Artist, Album
(on GUI screen)
List
TUNER
Frequency, DSP Program,
Audio Decoder
(for HD Radio information)
Call Sign*, Category*, Artist /
Song*, Album*, Tag Info, DSP
Program, Audio Decoder,
Frequency
SIRIUS
Channel, Category, Artist /
Song, Composer, Antenna, DSP
Program, Audio Decoder
XM
Channel, Category, Artist /
Song, Antenna, DSP Program,
Audio Decoder
MULTI CH
Input
Straight
Input source
Sound field program
