Yamaha RX RX-Z7 Owner'S Manual Download Page 65 | Manualshive

Page: 65 / 178

background image

65

En

BA

S

IC

OPERA

T

ION

SIRIUS Satellite Radio provides over 130 channels of exclusive entertainment and 100% commercial-free music. Only
SIRIUS has more than 65 original music channels, from today’s hits to R&B, oldies, and classical masterpieces. From
authentic country and real bluegrass to cool jazz, hot latin, reggae, rock and many more. Best of all, it’s all 100%
commercial-free.
SIRIUS also has more than 55 channels of world-class sports, news and entertainment. Included as part of your
subscription, you get up to 16 NFL games a week, up to 40 NBA games a week and up to 40 NHL games a week. (Games
are broadcast during their respective seasons.)
Coupled with great sports news from ESPN, the SIRIUS sports offering is unrivaled. And don’t forget a host of other
great news and entertainment, like NPR, CNBC, Fox News, Radio Disney and E! Entertainment Radio. For more
information, visit http://www.sirius.com/.

Connect the SiriusConnect tuner (sold separately) to the
SIRIUS jack on the rear panel of this unit. For details, see
the operating instructions provided with the SiriusConnect
tuner.

y

• To ensure optimal reception of the SIRIUS Satellite Radio

signals, the antenna of the SiriusConnect tuner must be placed
at or near a window with no obstacles in the path to the sky. The
orientation of the antenna for the best reception differs
depending on the area. Refer to the instruction manuals
supplied with the SiriusConnect tuner for the installation of the
antenna.You can mount it indoors or outdoors.

• Use the “ANTENNA INFO” information in the front panel or

“SIRIUS Information” screen in the GUI screen (page 70) to
check the antenna reception level and adjust the orientation of
the antenna.

• You need to connect the SiriusConnect tuner to the AC wall

outlet.

• If “CHECK SR TUNER” or “ANTENNA ERROR” appears in

the front panel display, the connection of the SiriusConnect
tuner or antenna is incorrect. In such cases, check the
connection of the SiriusConnect tuner and the antenna.

• If “NOT SUPPORTED” appears in the front panel display, this

unit does not support the connected SiriusConnect tuner.

SIRIUS Satellite Radio™ tuning

SIRIUS Satellite Radio

legal disclaimer

SIRIUS is available in the U.S.A. for subscribers with addresses in the continental U.S.A. and is available in Canada for subscribers
with a Canadian address. To Get SIRIUS Satellite Radio a subscription and compatible tuner and antenna are required and sold
separately. Visit sirius.com for the most complete and up-to-date channel lineup and information.
“SIRIUS” and the SIRIUS dog logo and related marks are trademarks of SIRIUS Satellite Radio Inc.

Connecting the SiriusConnect™
tuner

SIRIUS

DC

5V

AN

T

Notes

«
...
63
64
65
66
67
...
»

Summary of Contents for RX RX-Z7



















































































































































































Reviews:

No comments

Related manuals for RX RX-Z7

Brand: Laars Pages: 14

Brand: L-Acoustics Pages: 98

Brand: Beta Three Pages: 11

Brand: Technics Pages: 6

Brand: Daewoo Pages: 35

Brand: Cobolt Pages: 5

Brand: Altec Lansing Pages: 8

Brand: Curtis Pages: 34

Brand: SPX Pages: 36

Brand: iDM Pages: 60

HC-4100B Series

Brand: Daewoo Pages: 79

Brand: L-Acoustics Pages: 58

Brand: Definitive Technology Pages: 14

Arion ET-AR304-BK

Brand: Eagle Pages: 8

Brand: Goodmans Pages: 23

Brand: Panasonic Pages: 77

Brand: Pioneer Pages: 2

Brand: Pioneer Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands