Yamaha RX-A810 Page 89 Owner'S Manual Download

Page: 89 / 130

Setup menu items

Menu

Item

Function

Page

Speaker

Auto Setup

Optimizes the speaker settings automatically (YPAO).

Manual Setup

Power Amp Assign

Selects a speaker system.

Configuration

Front

Selects the size of the front speakers.

Center

Selects whether or not a center speaker is connected and its size.

Surround

Selects whether or not surround speakers are connected and its size.

Surround Back

Selects whether or not surround back speakers are connected and its size.

Front Presence

Selects whether or not presence speakers are connected.

Subwoofer

Selects whether or not a subwoofer is connected and its phase.

Extra Bass

Sets the speakers to produce the front channel low-frequency components.

Bass Cross Over

Sets the lower limit of low-frequency component produced from speakers of which the size is set to “Small”.

Distance

Sets the distance between each speaker and listening position.

Level

Adjusts the volume of each speaker.

Parametric EQ

PEQ Select

Selects a type of equalizer to be used.

PEQ Data Copy

Copies the parametric equalizer values acquired with “Auto Setup” to the “Manual” fields for fine adjustment.

Test Tone

Enables/disabled the test tone output.

Sound

Lipsync

Adjusts the delay between video and audio output.

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.

Max Volume

Sets the maximum volume so that sound is not too loud.

Initial Volume

Sets the initial volume for when this receiver is turned on.

Adaptive DSP Level

Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with volume adjustments.

Video

Analog to Analog Conversion

Enables/disables the video conversion between the analog video jacks.

Processing

Enables/disables the video signal processing (resolution and aspect ratio).

HDMI

HDMI Control

Enables/disables HDMI Control. You can also configure the relevant settings (ARC, TV audio input, etc).

Audio Output

Selects a device to output audio.

Standby Through

Select whether to output videos/audio (input through HDMI jacks) to the TV when this unit is in standby mode.

Network

IP Address

Configures the network parameters (IP address, etc).

Network Standby

Selects whether or not to turn on this unit by the command from other network devices.

MAC Address Filter

Sets the MAC address filter to limit access to this unit from other network devices.

Summary of Contents for RX-A810



































































































































Search results

Summary of Contents for RX-A810

Reviews:

Related manuals for RX-A810

Brands by name

Popular brands

Yamaha RX-A810, Owner'S Manual

Search results

Summary of Contents for RX-A810

Reviews:

Related manuals for RX-A810

Brands by name

Popular brands