Yamaha RX-A810 Owner'S Manual Download

Page: 77 / 130

You can configure the playback-related settings in accordance with a playback source.
Since this menu is operational on the front panel (or on the TV screen), you can easily
configure the settings during playback.

Press OPTION.

Front display

TV screen

Use the cursor keys to select an item and press ENTER.

• To return to the previous screen during menu operations, press RETURN.

Use the cursor keys ( / ) to select a setting and press ENTER.

To exit from the menu, press OPTION.

Option menu items

• Available items vary depending on the selected input source.

• Texts in parentheses denote indications on the front display.

Configuring settings in accordance with a playback source (Option menu)

VOL.

ToneControl

OPTION

Item

Function

Page

Tone Control
(Tone Control)

Adjusts the high-frequency range and low-frequency range
of sounds.

Adaptive DRC
(Adaptive DRC)

Sets whether dynamic range (from maximum to minimum)
is adjusted automatically in conjunction with adjusting the
volume level.

CINEMA DSP 3D Mode
(CINEMA DSP 3D)

Enables/disables CINEMA DSP 3D.

Dialogue Lift
(Dialog Lift)

Adjusts the vertical position of center sound when presence
speakers are used.

Extended Surround
(EXTD Surround)

Selects the 5.1 to 7.1-channel signal playback method
when surround back speakers are used.

Volume Trim
(Volume Trim)

Corrects volume differences between input sources.

Enhancer
(Enhancer)

Enables/disables Compressed Music Enhancer.

Traffic Program
(TrafficProgram)

Searches for a traffic information station automatically.

Shuffle
(Shuffle)

Configures the shuffle setting for the iPod (p.58), USB
storage device (p.63) or PC (p.66).

—

Repeat
(Repeat)

Configures the repeat setting for the iPod (p.58), USB
storage device (p.63) or PC (p.66).

—

Connect/Disconnect
(Connect/Disconnect)

Establishes/terminates a wireless connection between your
Bluetooth component and the Bluetooth receiver.

Pairing
(Pairing)

Performs pairing of your Bluetooth component and the
Bluetooth receiver.

Summary of Contents for RX-A810



































































































































Search results

Summary of Contents for RX-A810

Reviews:

Related manuals for RX-A810

Brands by name

Popular brands

Yamaha RX-A810, Owner'S Manual

Search results

Summary of Contents for RX-A810

Reviews:

Related manuals for RX-A810

Brands by name

Popular brands