Yamaha RX-A810 Owner'S Manual Download

Page: 124 / 130

124

HDMI signal compatibility

Audio signals

Video signals

This unit is compatible with the video signals of the following resolutions:
- 480i/60 Hz

- 720p/60 Hz, 50 Hz

- 576i/50 Hz

- 1080i/60 Hz, 50 Hz

- 480p/60 Hz

- 1080p/60 Hz, 50 Hz, 24 Hz

- 576p/50 Hz

• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending

on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the

instruction manual of each device.

• To decode audio bitstream signals on this unit, set the input source device appropriately so that the device

outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual of the playback device.

• This unit is not compatible with the audio commentary features (for example, the special audio contents

downloaded via Internet) of BD or HD DVD. This unit does not playback the audio commentaries of the BD
or HD DVD content.

Audio signal type

Audio signal format

Compatible media (example)

2ch Linear PCM

2ch, 32 to 192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio

Multi-channel Linear PCM

8ch, 32 to 192 kHz, 16/20/24 bit

DVD-Audio, BD (Blu-ray disc),
HD DVD

DSD

2/5.1ch, 2.8224 MHz, 1 bit

SACD

Bitstream

Dolby Digital, DTS

DVD-Video

Bitstream
(High definition audio)

Dolby TrueHD, Dolby Digital
Plus, DTS-HD Master Audio,
DTS-HD High Resolution Audio,
DTS Express

BD (Blu-ray disc), HD DVD

Summary of Contents for RX-A810



































































































































Search results

Summary of Contents for RX-A810

Reviews:

Related manuals for RX-A810

Brands by name

Popular brands

Yamaha RX-A810, Owner'S Manual

Search results

Summary of Contents for RX-A810

Reviews:

Related manuals for RX-A810

Brands by name

Popular brands