Yamaha RX-A700 Owner'S Manual Download Page 111

Page: 111 / 143

111

APPENDIX

Troubleshooting

iPod™/iPhone™

ACQUIRING

The signal is too weak.

Adjust the orientation of the antenna of the

SiriusConnect tuner. Check the antenna

reception level from the Antenna

information on the front panel display, or

the SIRIUS Information screen on the TV

screen.

UPDATING

The SiriusConnect tuner is

updating the channel list.

Wait until the updating is complete.

—

The period of the subscription is

end.

Contact SIRIUS Satellite Radio to renew the

subscription.

—

F/W UPDATING

The SiriusConnect tuner is

updating the firmware.

Wait until the updating is complete.

—

CALL SIRIUS
(CALL 888-539-
SIRIUS TO
SUBSCRIBE)

The selected channel is not

subscribed.

Contact SIRIUS Satellite Radio to subscribe

the selected channel.

URL: https://activate.siriusradio.com/

Phone: 1-888-539-SIRIUS (1-888-539-

7474)

—

Select another channel.

SUB UPDATED

The subscription information is

updated.

LOCK

The parental lock function is

enabled.

Use Numeric keys to enter the 4-digit code,

select OK and then press

ENT

Reset the SIRIUS Satellite Radio parental

lock code to the factory default setting.

100

INVALID

The selected channel is currently

out of service.

Select another channel.

Not Available

The operation you made is not

available.

Display

Cause

Remedy

See

page

Display

Cause

Remedy

See

page

The unit is in the process of

recognizing the connection with

your iPod/iPhone.

—

The unit is in the middle of

acquiring song lists from your

iPod/iPhone.

—

Connect error

There is a problem with the signal

path from your iPod/iPhone to the

unit.

Turn off the unit and reconnect the Yamaha

iPod universal dock to the DOCK jack of

the unit.

Remove your iPod/iPhone from the Yamaha

iPod universal dock and then place it back in

the dock.

Unknown iPod

The iPod/iPhone being used is not

supported by the unit.

Connect an iPod/iPhone supported by the

unit.

—

iPod connected

Your iPod/iPhone is properly

placed in the Yamaha iPod

universal dock.

—

Your iPod/iPhone is properly

placed in the Yamaha iPod

wireless transmitter and connected

with this unit via wireless

transmission.

Disconnected

Your iPod/iPhone is removed from

the Yamaha iPod universal dock.

—

Your iPod/iPhone is disconnected

with this unit via wireless

transmission.

—

Unable to play

The unit cannot playback the

songs currently stored on your

iPod/iPhone.

Check that songs are currently stored on

your iPod/iPhone.

—

Summary of Contents for RX-A700
















































































































































Search results

Summary of Contents for RX-A700

Reviews:

Related manuals for RX-A700

Brands by name

Popular brands

Yamaha RX-A700, Owner'S Manual

Search results

Summary of Contents for RX-A700

Reviews:

Related manuals for RX-A700

Brands by name

Popular brands