PREPARATIONS
➤
Optimizing the speaker settings automatically (YPAO)
En
55
3
When the measurements at the positions you want
to measure are completed, use the cursor keys to
select “CANCEL” and press ENTER.
When you have taken measurements at 8 listening
positions, the following screen appears automatically.
(RX-A2020)
(RX-A3020 [when angle measurement is disabled])
Proceed to Step 5.
(RX-A3020 [when angle measurement is enabled])
Proceed to Step 4.
4
Perform the angle measurement.
a
Use the cursor keys to select “YES” and press ENTER.
Select “NO” to cancel the angle measurement.
b
Place the supplied microphone base at the listening position you
will be seated most frequently and set the YPAO microphone to
the position “1”.
• We recommend using a tripod to place the microphone base at ear height.
Use the tripod screws to fix the microphone base in place.
• Do not move the microphone base until the third angle measurement
finishes.
c
Press ENTER to start the first angle measurement.
The following screen appears on the TV when the first angle
measurement finishes.
FRONT
DIRECTION
Microphone
base
SOURCE
RECEIVER
AV
AUDIO
1
2
3
4
5
6
7
V-AUX
1
2
3
4
MULTI
PHONO
USB
NET
TUNER
[ C ]
[ A ]
[ B ]
CLASSICAL
LIVE
CLUB
ENTERTAIN
MOVIE
STEREO
STRAIGHT
INPUT
PURE
DIRECT
MUTE
TV
SCENE
1
2
3
4
PROGRAM
VOLUME
TV VOL
MUTE
MODE
TOP MENU
RETURN
DISPLAY
POP-UP/MENU
TV CH
PRESET
ENTER
ON SCREEN
OPTION
SOURCE
RECEIVER
AV
AUDIO
1
2
3
4
5
6
7
V-AUX
1
2
3
4
MULTI
L
L
PHONO
USB
NET
TUNER
[ C ]
[ A ]
[ B ]
ENTER
1 2 3 4 5 6 7 8 9
Automatic speaker setup
Cursor keys
