Yamaha RX-A2000, Owner'S Manual

Page: 48 / 195

En
48
PLAYBACK
1
Turn on external components (TV, DVD
player, etc.) connected to this unit.
2
Use the
d
Input selector to select the input
source.
The name of the selected input source is displayed on
the front panel display.
J
1
When USB, NET, DOCK, TUNER or SIRIUS is
selected, the content window is displayed (
☞
p. 62 ).
3
Play the external component that you have
selected as the source input, or select a
radio station on the tuner.
Refer to the instruction manuals provided with the
external component for details on playback.
For details on the following operations, refer to the
corresponding pages:
• “FM/AM tuning” (
☞
p. 63 )
• “Listening to the HD Radio™” (
☞
p. 66 )
• “Listening to the SIRIUS Satellite Radio™” (
☞
p. 70 )
• “Playing back tunes on the PC” (
☞
p. 76 )
• “Playing back tunes on the USB storage devices”
(
☞
p. 78 )
• “Listening to the Internet Radio” (
☞
p. 80 )
• “Using the Rhapsody
®
service” (
☞
p. 82 )
• “Listening to the SIRIUS Internet Radio” (
☞
p. 86 )
• “Playing back tunes from your iPod™/iPhone™”
(
☞
p. 90 )
• “Playing back tunes from Bluetooth™ components”
(
☞
p. 94 )
4
Press
n
/- to adjust the volume.
To mute the output.
Press
o
MUTE to mute the audio output.
Press
o
MUTE again to unmute.
■
Selecting the active HDMI OUT jack
Use this function to select the HDMI OUT jack(s) used
to output signal.
Press
x
HDMI OUT repeatedly to select setting.
The HDMI output setting changes as follows.
Basic playback procedure
AV
AUDIO
MUTE VOLUME
4
4 3 1 2
7 5 6 V-AUX
4 3 1 2
USB MULTI NET PHONO
TUNER DOCK
HDMI OUT
SIRIUS
SOURCE
RECEIVER
TUN./CH
CATEGORY
[ A ]
n
o
d
x
OUT 1+2 Outputs the signal at both the HDMI OUT 1
and HDMI OUT 2 jacks simultaneously.
OUT 1 Outputs the signals at the HDMI OUT 1 jack.
OUT 2
Outputs the signals at the HDMI OUT 2 jack.
Off
Any signals are not output at the HDMI OUT
1 and HDMI OUT 2 jacks. Select this setting
when you do not use the video monitor
connected to one of the HDMI OUT jacks.
• The HDMI OUT jack that utilizes the HDMI Control
function can be selected with “Control Select”
(
☞
p. 119 ).
• When “HDMI Control” is set to “On,” the HDMI OUT
jack selected with “Control Select” is automatically
enabled in addition to the HDMI OUT jack selected
here by commands from the external component
supporting HDMI Control connected to the jack
(
☞
p. 119 ).
• The active HDMI OUT jack(s) can be registered with
the SCENE function (
☞
p. 102 ).
HDMIOUTSel.
OUT1+2
HDMIOUTSel.
Off
HDMIOUTSel.
OUT1
HDMIOUTSel.
OUT2
J
1 :
You can change the input source name displayed on the front
panel display as necessary (
☞
p. 99 ).