Yamaha RX-A2000 Owner'S Manual Download Page 155

Page: 155 / 195

155

APPENDIX

Troubleshooting

USB and Network

CALL SIRIUS
(CALL 888-539-
SIRIUS TO
SUBSCRIBE)

The selected channel is not

subscribed.

Contact SIRIUS Satellite Radio to subscribe

the selected channel.

URL: https://activate.siriusradio.com/

Phone: 1-888-539-SIRIUS (1-888-539-

7474)

—

Select another channel.

SUB UPDATED

The subscription information is

updated.

LOCK

The parental lock function is

enabled.

Use Numeric keys to enter the 4-digit code,

select OK and then press

ENT

Reset the SIRIUS Satellite Radio parental

lock code to the factory default setting.

140

INVALID

The selected channel is currently

out of service.

Select another channel.

Not Available

The operation you made is not

available.

Display

Cause

Remedy

See

page

Problem

Cause

Remedy

See

page

“No Device” is

displayed even when

a USB device is

present.

This unit recognized the USB

storage device as an illegal device.

Turn this unit off then on again.

—

The music files and

directories in the

USB device cannot

be viewed.

The music files and directories are

placed in locations other than the

FAT area.

Place music files and directories in the FAT

area.

—

You are attempting to browse

directory hierarchies of over 8

levels or a directory with more

than 500 files.

Modify the data structure on your USB

device.

—

The PC server/

Internet Radio does

not function

properly.

The IP address is not set properly.

Set the DHCP server function of the router

to ON. Alternately, perform manual

configuration according to the current

operating environment.

121

The network cable is not

connected.

Connect it properly.

The music in the PC

server cannot be

played back.

The PC does not have Windows

Media Player installed in it.

Install Windows Media Player in the PC.

—

The music is recorded in a format

that cannot be played on this unit.

This unit cannot play music

formats other than WMA, MP3,

MPEG-4 AAC, FLAC, and WAV

(PCM format). Also note that it

cannot play certain music files

even if these are recorded in the

WMA, MP3, MPEG-4 AAC,

FLAC, or WAV format.

Play music recorded in a format that this

unit is compatible with.

—

Summary of Contents for RX-A2000




































































































































































































Search results

Summary of Contents for RX-A2000

Reviews:

Related manuals for RX-A2000

Brands by name

Popular brands

Yamaha RX-A2000, Owner'S Manual

Search results

Summary of Contents for RX-A2000

Reviews:

Related manuals for RX-A2000

Brands by name

Popular brands