Yamaha RX-A2000 Owner'S Manual Download Page 11

Page: 11 / 195

INTRODUCTION

Part names and functions

Front panel display

Tuner indicator

Light up according to the status of a received station (

☞

p. 63

HD indicator

Lights up when this unit is tuned into the HD Radio station (

☞

p. 66

TAG indicator

Lights up when the selected HD Radio program (or song being
played) supports iTunes Tagging (

☞

p. 67

ZONE2/ZONE3 indicator

Lights up when the audio or video output to Zone2 or Zone3 is
enabled (

☞

p. 149

SLEEP indicator

Blinks when the sleep timer is on (

☞

p. 13

p. 149

PARTY indicator

Lights up when the party mode is active (

☞

p. 122

Multi information display

Displays a range of information on menu items and settings.

VOLUME indicator

Displays the current volume level.

HDMI indicator

Lights up during normal HDMI communication.

IN indicator

Lights up when this unit detects the external component connected to
the HDMI input jack (

☞

p. 31

OUT 1/OUT 2 indicators

Indicate which HDMI OUT jack outputs audio/video signals (

☞

p. 29

ENHANCER indicator

Lights up when the Compressed Music Enhancer is active (

☞

p. 53

CINEMA DSP indicator

Lights up when a sound field effect that uses CINEMA DSP
technology is selected.

CINEMA DSP 3D indicator

Lights up when CINEMA DSP 3D is activated (

☞

p. 52

Cursor indicators

Light up if corresponding cursors on the remote control are available
for operations.

MUTE indicator

Blinks when audio is muted.

Speaker indicators

Indicate speaker terminals from which signals are output.

ADAPTIVE DRC indicator

Lights when the adaptive dynamic range control feature is tuned on
(

☞

p. 60

Surround L speaker

Subwoofer 1

Surround R speaker

Center speaker

Surround back L

speaker

Surround back R
speaker

Surround back

speaker

Presence L speaker

Presence R speaker

Front L speaker

Front R speaker

Subwoofer 2

■

Switching information on the front panel display

The front panel can display sound programs and surround
decoder names as well as the active input source.
Press

INFO

repeatedly to cycle through displayed

informations.

VOLUME

A V 1

S t a n d a r d

Input source name

Sound program (DSP program)

STEREO TUNED

PARTY

ENHANCER

SLEEP

MUTE VOLUME

ADAPTIVE DRC

1 :

“SB” is displayed when using a 6.1-channel configuration only.

2 :

During FM/AM reception, the frequency is displayed instead of the input source. During SIRIUS Satellite Radio signals reception, the channel is displayed instead of the input source.

Summary of Contents for RX-A2000




































































































































































































Search results

Summary of Contents for RX-A2000

Reviews:

Related manuals for RX-A2000

Brands by name

Popular brands

Yamaha RX-A2000, Owner'S Manual

Search results

Summary of Contents for RX-A2000

Reviews:

Related manuals for RX-A2000

Brands by name

Popular brands