SETUP
Setting various functions (Setup menu)
115
Setting HDMI functions
HDMI setup items
■
Receiver operation via TV (HDMI Control)
HDMI Control
Set the HDMI Control function to “On” to operate devices
connected via HDMI. If the TV or other external components
support HDMI Control (e.g., Panasonic VIERA Link), you can use
the remote controls of those devices to operate some of this unit’s
functions, and to synchronize this unit with the operation of those
devices.
Refer to “Using the HDMI Control function” (
) for setting
instructions.
■
Selecting an HDMI OUT jack for the HDMI
Control function
Control Select
Select the HDMI OUT jack that utilizes the HDMI Control
function.
Refer to “Using the HDMI Control function” (
) for setting
instructions.
■
Listening to TV audio via single HDMI
cable (Audio Return Channel)
ARC (Audio Return Channel)
You can enable or disable the Audio Return Channel function.
When using a TV that supports Audio Return Channel function and
the function is enabled, the TV’s audio output is transmit to this
unit via an HDMI cable.
The TV audio input to this unit is regarded as the input source
selected in “TV Audio Input.”
J
3
By means of this function, you do not need to connect the TV’s
audio output (digital audio output or analog audio output) to the
unit.
When the TV audio is input to the unit using Audio Return
Channel, “TV” is displayed on the front panel display.
HDMI Control
Turns the HDMI Control on or off.
Control Select
Choose an HDMI OUT jack on which HDMI
Control function is enabled.
ARC (Audio Return
Channel)
Turns the Audio Return Channel function on or
off.
TV Audio Input
Chooses automatically selected audio input in
conjunction with TV operation when the
HDMI Control is turned on.
Audio Output
J
1
Specifies whether or not audio signal is output
through this unit and a TV connected via the
HDMI OUT 1-2 jacks.
Standby Through
J
1
Turns the Standby Through function on or off.
Off
(Default)
Sets HDMI Control to “Off.”
On
Sets HDMI Control to “On.”
J
2
If this unit is connected to HDMI devices that do not support the
HDMI Control function, these functions will not operate.
OUT1(TV1)
Applies the HDMI Control function for the HDMI
OUT 1 jack.
OUT2(TV2)
Applies the HDMI Control function for the HDMI
OUT 2 jack.
We recommend to unplug and plug again the power cable of this
unit and the TV when changing the Control Select.
Off
(Default)
Sets the Audio Return Channel to “Off.”
On
Sets the Audio Return Channel to “On.”
•
“ARC (Audio Return Channel)” is enabled only for the HDMI
OUT 1 or 2 jack selected with “Control Select.”
•
Refer to “Single HDMI cable input to TV audio with Audio
) for setting instructions.
VOLUME
A U D I O 1
TV
T h e B o t t o m L i n
J
1 :
This item appears depending on “HDMI Control.”
J
2 :
When the HDMI Control is “On,” the Standby Through function is
automatically enabled. When this unit enters standby mode, the audio and
video signals from the last-selected HDMI input source will continue to be
transmitted to the TV. The HDMI input source can only be changed using the
remote control.
J
3 :
While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.
