Preparation 1
Making connections
Tip
•
To connect the product to the Internet through a USB data communication terminal, refer to “Connecting to the Internet using a
USB data communication terminal” (page 49).
ON
ST ANDBY
W AN
4
3
2
1
CONSOLE
LAN
1
2
3
WAN
CONSOLE
STANDBY
ON
SPEED
LINK/DATA
4
LAN
LAN
1
Connect the LAN port of your PC to one of the LAN ports of the
product with a LAN cable.
2
Connect the LAN port of your cable modem, ADSL modem or
ONU to the WAN port of the product with a LAN cable.
Please also refer to the document provided by your provider and instruction manuals for ADSL
modem and ONU.
Note
If you switch an environment in which a cable modem, an ADSL modem, or an ONU is directly
connected to a PC to a connection with the product, or an installed router is replaced with the product,
proper connections may not be made because, for instance, addresses cannot be obtained. In some
cases, you may need to configure some settings, to perform a reset, or to wait for a specified period of
time (e.g., at least 20 minutes). For more information, follow the instructions in the relevant manuals.
18
M
ak
in
g p
re
pa
ra
tio
ns
2
