R
6-6
PERIODIC MAINTENANCE AND MINOR REPAIR
/home/Imai/imai_data/YMC-om/AB9239_RT100-26/English/E-6.frame
1. Dipstick
2. Maximum level mark
3. Minimum level mark
EAU02994
Transmission oil
Oil level measurement
1. Place the machine on a level place
and hold it in an upright position.
Warm up the engine for several
minutes.
NOTE:
Be sure the machine is positioned
straight up when checking the oil level.
A slight tilt toward the side can result in
false readings.
2. With the engine stopped, unscrew
the dipstick and rest it on the
threads of the oil filler hole.
NOTE:
Wait a few minutes until the oil level
settles before checking.
3. The oil level should be between
the maximum and minimum level
marks as shown. If the level is low,
add sufficient oil to raise it to the
proper level.
1. Drain bolt
Transmission oil replacement
1. Warm up the engine for several
minutes.
2. Stop the engine. Place an oil pan
under the engine, and remove the
dipstick.
3. Remove the drain bolt and drain
the oil.
4. Install the drain bolt and tighten it
to the specified torque.
Tightening torque:
Drain bolt:
20 Nm (2.0 mákg)
