Operation
36
ESU11393
Driving
WARNING
EWS00300
Be sure to read the “SAFETY INFORMA-
TION” section on page 5 and the “Riding
your snowmobile” section on page 31
carefully before operating the snowmo-
bile.
TIP
Make sure that the engine is warmed up
enough before riding.
WARNING
EWS00310
●
Make sure that the throttle lever is fully
released and the snowmobile is at a full
stop before shifting.
●
Be sure to slide the shift lever to “FWD”
or “REV” until it stops completely and
only while the engine is idling.
●
Make sure that the area behind the
snowmobile is clear before reversing.
Watch behind.
●
Reduce speed and avoid sharp turning
when operating the snowmobile in re-
verse.
1.
To select the desired operating position,
pull the shift lever out, slide it to “FWD” or
to “REV” until it stops, and then release it.
NOTICE:
Do not shift from “FWD” to
“REV” or from “REV” to “FWD” while
the snowmobile is moving, as the
drive train could be damaged.
[ECS00811]
TIP
The reverse buzzer beeps while the shift lever
is in reverse.
2.
Release the parking brake by moving the
parking brake lever to the right.
1. Pull out.
2. Slide to “FWD” (forward).
3. Release.
1. Pull out.
2. Slide to “REV” (reverse).
3. Release.
1
2
3
3
2
1
U8JA10E0.book Page 36 Tuesday, May 19, 2009 2:37 PM
