Yamaha RS7000 Ver.1.2, Owner'S Manual

Page: 265 / 352

1. MIDI Basics
RS7000 265
7
Other Inf
ormation
4. Parts and Part Parameters
The individual single tone generators that make up a multi tone
generator are often referred to as “parts”. Since the RS7000 tone
generator can simultaneously play data on up to 16 channels, it
has 16 parts. In addition to specifying separate MIDI channels for
each part, it is possible to individually set the voice, pan position,
volume, and a range of other parameters.
The RS7000 provides voice, pan, volume, effect send level, and
other tone generator parameters in the MIXER and VOICE EDIT
sub modes. Taking a look at the various parameters available will
give you a good idea of the many parameters provided for each
part. These type of parameters are commonly known as “part
parameters”.
5. Parts and Tracks
In the RS7000, the performance data recorded on each of its 16
tracks plays the corresponding tone generator parts. Although the
default track-to-part relationship is that track 1 plays part 1, track
2, plays part 2, etc., these assignments can be changed via the
SETUP Out Channel display page (Page 110) so that any track
plays any part.
6. MIDI Signal Flow
Sequencer
Track 1
Track 2
Track 3
Track 16
Tone Generator
Part 1
Part 2
Part 3
Part 16
MIDI IN
ECHO BACK=RecM
ECHO BACK=THRU
MIDI OUT
MIDIフィルター シーケンサー部 音源部
MIDIフィルター
コントローラー部
MIDI Filter
MIDI Filter Sequencer
Controller
Tone Generator