![background image](http://html.mh-extra.com/html/yamaha/rs7000-ver-1-2/rs7000-ver-1-2_owners-manual_899785020.webp)
The Controls & Connectors
20
RS7000
Rear Panel with Optional AIEB2 I/O
Expansion Board Installed
1
OPTICAL IN, OUT Connectors
Digital input and output for connection via optical cable.
Digital signals to be recorded (48 kHz, 44.1 kHz, or 32 kHz
fs) can be connected to OPTICAL IN. OPTICAL OUT deliv-
ers the same signal as the OUTPUT L/MONO and R jacks
in digital form (fs = 44.1 kHz).
2
DIGITAL IN, OUT Connectors
Digital input and output in S/P DIF format (the format nor-
mally used by home-use CD or DAT equipment) for connec-
tion via coaxial (RCA-pin) cable. Digital signals to be
recorded (48 kHz, 44.1 kHz, or 32 kHz fs) can be con-
nected to DIGITAL IN. DIGITAL OUT delivers the same sig-
nal as the OUTPUT L/MONO and R jacks in digital form (fs
= 44.1 kHz).
3
ASSIGNABLE OUT 1 ~ 6 Jacks
Unlike the STEREO OUT outputs, the output from individ-
ual tracks can be assigned to these outputs. (Page 21)
The ASSIGNABLE OUT jacks can be used as mono out-
puts or as stereo pairs (1&2, 3&4, 5&6).
Options
A range of options are available to give the RS7000 even greater
music production capabilities.
Expansion Memory (SIMM)
Recorded samples and samples loaded from memory card must
be stored in the internal memory in order to be played.
The RS7000 comes equipped with 4 MB of memory which
allows up to 46 seconds of monaural sample recording or play-
back at the maximum 44.1 kHz sampling frequency. Additional
memory (SIMM) can be installed to allow much longer sample
recording and playback. If you need longer sample recording and
playback time, or want to keep a large number of samples in
memory at the same time, you may need to add extra memory.
See page 274 of the Appendix for details on installing extra mem-
ory.
POWER
MIDI
IN
SCSI
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
MUSICAL INSTRUMENT
US LISTED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
: RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR.
WARNING
379U
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLWWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECIVED,INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003
DU CANADA.
FOOT SW
CONTRAST
R
R
INPUT
ASSIGNABLE OUT
DIGITAL
OPTICAL
AS1
AS2
AS3
AS4
AS5
AS6
OUT
OUT
IN
OUTPUT
L
L/MONO
PHONES
OUT A
OUT B
MODEL
SER. NO.
MADE IN JAPAN
ON /
AC INLET
OFF
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IN
1
2
3
Summary of Contents for RS7000 Ver.1.2
