Control functions
22
engine longer than necessary if there is an
error code to avoid possible engine dam-
age.
[ECS00821]
RST1NTF / RST1NTFY
RST9N
ESU10532
Engine stop switch “ ”
The engine stop switch is used to stop the
engine in an emergency. Simply push the
stop switch to stop the engine. To start the
engine, pull the stop switch and proceed with
starting the engine. (See page 44 for engine
starting procedures.)
During the first few rides, practice using the
stop switch so that you can react quickly in
an emergency.
ESU10662
Headlight beam switch
“LIGHTS”
Push the headlight beam switch to change
the headlight to high beam “HI” or to low
beam “LO”.
ESU12655
Grip/thumb warmer adjusting
switch
The grip warmer adjusting switch and the
thumb warmer adjusting switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
1. Warning light “
”
2. Engine trouble warning indicator “
”
3. Error code display
1. Warning light “
”
2. Engine trouble warning indicator “
”
3. Error code display
3
1
2
1
2
3
1. Engine stop switch “
”
1. Headlight beam switch “LIGHTS”
2. High beam “HI”
3. Low beam “LO”
U8JV72E0.book Page 22 Thursday, May 18, 2017 1:47 PM
Downloaded from
