Control functions
23
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
“LIGHTS”
Push the headlight beam switch to change the
headlight to high beam “HI” or to low beam
“LO”.
ESU14061
Grip/thumb warmer adjusting
switch
RS90GT / RS90LTGT / RST90GT
The grip/thumb warmer adjusting switch con-
trols the electrically heated handlebar grips
and throttle lever.
To raise the temperature
To raise the grip warmer temperature, press
the “
” side of the switch. To raise the thumb
warmer temperature, press the “
” side of
the switch.
To lower the temperature
Continue to press the switch until the temper-
ature level returns to the minimum level, and
then raise the temperature to the desired lev-
el.
See “Fuel meter and grip/thumb warmer level
indicator” on page 18 for detailed information.
RST90
The grip warmer adjusting switch and the
thumb warmer adjusting switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
1. Engine stop switch “
”
1. Headlight beam switch “LIGHTS”
2. High beam “HI”
3. Low beam “LO”
1. Grip/thumb warmer adjusting switch
1. Grip warmer adjusting switch
1
1
U8JA11E0.book Page 23 Monday, June 14, 2010 10:22 AM
