Yamaha ROADLINER XV19SW, Service Manual

Page: 287 / 444

GENERATOR AND STARTER CLUTCH
5-75
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
ET1D71020
CHECKING THE TORQUE LIMITER
1. Check:
• Torque limiter
Damage/wear
→
Replace.
NOTE:
Do not disassemble the torque limiter.
EAS24600
INSTALLING THE STARTER CLUTCH
1. Install:
• Starter clutch
NOTE:
While holding the generator rotor “1” with the
sheave holder “2”, tighten the starter clutch
bolts.
EAS24510
INSTALLING THE GENERATOR
1. Install:
• Woodruff key
• Generator rotor “1”
• Washer
• Generator rotor bolt “2”
NOTE:
• Clean the tapered portion of the generator
shaft and the generator rotor hub.
• When installing the rotor, make sure the woo-
druff key is properly seated in the key way of
the generator shaft.
• Lubricate the generator rotor bolt threads and
washer mating surfaces with engine oil.
2. Tighten:
• Generator rotor bolt “1”
NOTE:
While holding the generator rotor “2” with a
sheave holder “3”, tighten the generator rotor
bolt.
3. Apply:
• Sealant
(onto the stator coil lead grommet)
T
R
.
Starter clutch bolt
24 Nm (2.4 m·kg, 17 ft·lb)
LOCTITE
®
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
2
1
T
R
.
Generator rotor bolt
80 Nm (8.0 m·kg, 58 ft·lb)
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
1
2
1
2
3