Yamaha ROADLINER XV19SW, Service Manual

Page: 122 / 444

ELECTRICAL SYSTEM
3-32
b. Disconnect:
• Headlight coupler “1”
c. Detach:
• Headlight bulb holder “2”
d. Remove:
• Headlight bulb
WARNING
EWA13320
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
e. Install:
• Headlight bulb
Secure the new headlight bulb with the head-
light bulb holder.
CAUTION:
ECA13690
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
f. Attach:
• Headlight bulb holder
g. Connect:
• Headlight coupler
h. Install:
• Headlight bulb cover
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
7. Install:
• Headlight assembly
8. Connect:
• Air temperature sensor coupler
9. Install:
• Headlight cover
10.Install:
• Windshield (For XV19CTS(C)/
XV19CT(C)/XV19CTM(C))
Refer to “GENERAL CHASSIS” on page 4-1.
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
1. Adjust:
• Headlight beam (vertically)
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Turn the adjusting bolt “1” in direction “a” or
“b”.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
2. Adjust:
• Headlight beam (horizontally)
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Turn the adjusting bolt “1” in direction “a” or
“b”.
1
2
1
New
T
R
.
Headlight cover bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
Direction “a”
Headlight beam is raised.
Direction “b”
Headlight beam is lowered.
Direction “a”
Headlight beam moves to the right.
Direction “b”
Headlight beam moves to the left.
a
b
1