Yamaha RN800ASL User Manual Download Page 65

Page: 65 / 150

Displaying the DAB information

Model For

U.K., Europe, Russia and Australia

This product can receive various types of DAB information when it is tuned into a DAB radio station.

Tune in to the desired DAB radio station.

Press the DISPLAY key on the remote control to select between the various display
items.

The information appears on the front display.

Service Label

Station name

Dynamic Label

Information on the current station

Ensemble Label

Ensemble name

Program Type

Station genre

Date and Time

Current date and time

Audio Mode

Audio mode (monaural/stereo) and bit rate

CH Label/Frequency

Channel label and frequency

Signal Quality

Signal reception quality (0 [none] to 100 [best])

NOTE

Some information may not be available depending on the selected DAB radio station, and “---” is displayed.

PLAYBACK > Listening to the radio

Summary of Contents for RN800ASL























































































































































Search results

Summary of Contents for RN800ASL

Reviews:

Related manuals for RN800ASL

Brands by name

Popular brands

Yamaha RN800ASL, User Manual

Search results

Summary of Contents for RN800ASL

Reviews:

Related manuals for RN800ASL

Brands by name

Popular brands