RMio64-D Owner’s Manual
8
Controls and Functions
Front Panel
1
MADI [SRC ON] indicator
MADI [SRC ON] key
Turns the MADI SRC (Sampling Rate Converter) on
(indicator lights) and off.
2
MADI [SRC WCLK IN] indicator
MADI [SRC WCLK IN] key
Selects whether the word clock that is input to the
MADI [WCLK IN FOR SRC] connector on the rear
panel is used or not as the reference MADI SRC
clock. (Indicator lights when used.)
If no valid word clock input is detected, this indicator
flashes.
3
MADI [INPUT RATE Fs 44.1kHz] indicator
MADI [INPUT RATE Fs 48kHz] indicator
These indicators turn on accordingly when the
device automatically detects the MADI input signal
as 44.1 kHz or 48 kHz. If no valid MADI input signal is
detected, both indicators remain off.
4
MADI [INPUT RATE 1Fs] indicator
MADI [INPUT RATE 2Fs] indicator
MADI [INPUT RATE 4Fs] indicator
MADI [INPUT RATE] 1Fs/2Fs/4Fs key
Selects 1Fs (1x), 2Fs (2x), or 4Fs (4x) in combination
with the MADI input rate. For example, for a MADI
input rate of 192 kHz (4x 48 kHz), confirm that the
MADI [INPUT RATE Fs 48kHz] indicator is on, and
then select [4Fs].
NOTE
If you select [2Fs], the unit automatically detects the MADI
input signal frame format (48 kHz/96 kHz).
5
MADI [STATUS INPUT] indicator
MADI [STATUS OUTPUT] indicator
MADI [STATUS] INPUT/OUTPUT key
Selects whether to display the MADI input signal or
MADI output signal information (frame format/
number of channels).
NOTE
You can use this key to lock the panel to prevent operation
of the keys (page 14).
6
MADI [STATUS FRAME 48k] indicator
MADI [STATUS FRAME 96k] indicator
Displays the frame format of the MADI input signal or
output signal. For 44.1 kHz and 48 kHz, the [STATUS
FRAME 48k] indicator is lit. For 88.2 kHz and 96 kHz,
the [STATUS FRAME 96k] indicator is lit. If no valid
MADI input signal is detected, both indicators remain
off.
NOTE
If no valid MADI input signal is detected, the MADI output
signal is set to 48 kHz/64 channels.
7
MADI [STATUS CHANNEL 64] indicator
MADI [STATUS CHANNEL 56] indicator
Displays the number of channels (64 or 56) for the
MADI input signal or output signal. If no valid MADI
input signal is detected, both indicators remain off.
NOTE
If no valid MADI input signal is detected, the MADI output
signal is set to 48 kHz/64 channels.
8
WORD CLOCK [WCLK IN] indicator
WORD CLOCK [MADI] indicator
WORD CLOCK [DANTE] indicator
WORD CLOCK WCLK IN/MADI/DANTE key
Selects the word clock source.
1 2 3
4
5 6 7
8
9
) !
@
#
WCLK IN
Uses the word clock signal that is input
from the [WORD CLOCK IN] connector
on the rear panel. This indicator flashes if
no valid word clock input is detected.
MADI
Uses the word clock of the MADI input
signal. This indicator flashes if no valid
word clock input is detected.
DANTE
Uses the word clock from the Dante
network.
Summary of Contents for RMio64-D
Page 32: ......
