RM-TT Reference Manual
3
Bottom panel
1
Network port indicators (Dante/PoE port)
NOTICE:
• When disconnecting the LAN cable from the Dante/PoE port, wait at least five seconds before reconnecting the cable.
Otherwise, damage or malfunctions may result.
• With a Dante network, do not use the EEE function* of the network switch. Although mutual power consumption settings
are automatically adjusted between switches that support the EEE function, some switches do not perform that properly.
As a result, the switch’s EEE function may be enabled inappropriately in the Dante network, possibly degrading clock
synchronization performance and interrupting audio. Therefore, please note the following.
- When using managed switches, turn off the EEE function on all ports used for Dante. Do not use a switch that does not
allow the EEE function to be turned off.
- When using unmanaged switches, do not use switches that support the EEE function. In such switches, the EEE
function cannot be turned off.
* EEE (Energy-Efficient Ethernet) function: Technology that reduces the power consumption of Ethernet devices during
periods of low network traffic; also known as Green Ethernet or IEEE802.3az.
Network port indicator
Unit status
Left indicator lit green
Link up
Left indicator flashes green
Transferring data
Left indicator unlit
Link down
Right indicator lit green
Operating on word clock of peripheral device (master)
Right indicator flashes green
Acting as word-clock master
Right indicator flashes orange
Word clock unlocked
1
