CS-R5 Owner’s Manual
17
F
Channel Strip section (Bay L, Bay C, Bay R)
1
[ENCODER ASSIGN] key
Displays a screen that enables you to switch between
the Screen Encoder function and the Channel
Encoder function. You can use only the Channel
Encoder function for channel strips A and B.
2
[HOME] key
Recalls a group of settings for the bay. Press and hold
down this key to store the following settings:
• Layers and current screen data
• Selected channel/parameters on screen
3
PIN indicator
Lights up when the Pinning function for the
[TOUCH AND TURN] knob is turned on.
(This feature will be supported by a future update.)
4
[TOUCH AND TURN] knob
Controls the parameter of the knob you selected by
touching the touch screen.
5
[SHIFT] key
Combine with another key to perform a certain
function.
The following table shows an example of using the
[SHIFT] key combined with another key. For more
information, please refer to the RIVAGE PM series
Operation Manual.
6
[SENDS ON FADER] key
Turns SENDS ON FADER mode on and off. While
SENDS ON FADER mode is enabled, the input faders
will control the send levels of the corresponding
buses.
1
2
3
5
4
6
Procedure
Function
Press and hold down the
[SHIFT] key and press
multiple [SEL] keys.
Temporary link.
Controlling the parameter of
multiple channels
simultaneously.
