52
“AVB Information” shows the system’s AVB MAC Address, AVB sync mode, the
IP Address of the Internal, or clock master, and if the link is up or down. If
AVB is not connected, the Link Status will show “Down” and there will be no
Master IP Address.
System Configuration
The System Configuration page allows setting several of the system
configuration values, including system name, cluster name, and region.
Changes to any entry on this web page only take effect when clicking the Save
button. Leaving the page without previously saving changed information will
discard the changes.
System Name allows changing the descriptive name under which a system is
being identified. It is recommended to select a name that helps identifying a
system in the cloud web UI or in a cluster.
The Cluster name allows grouping several Executive Elite systems together for
larger installations. Executive Elite Systems using the same cluster name in a
subnet share group and microphone mute information, allowing common mute
behavior to be defined across several Executive Elite systems. Every Executive
Elite base intended to be in that cluster has to use the exact same cluster
name. To remove a base from a cluster, delete the cluster name and leave the
cluster name field empty. To make the Executive Elite base part of a different
cluster, simply enter the name of that cluster in the field. An Executive Elite
base DSP can only be part of one cluster at a time.
To reset the system password used on the front panel user interface and the
local web interface enter the new password in the password field, and confirm
it in the confirm password field before saving. The password needs to be
numeric, and has a minimum length of 4 digits.
