Yamaha reface, Manual

Page: 29 / 32

REFACE EssEntiAl knowlEdgE 06|2015
yamaha.com 29
speCial
keYboard Commands
Certain settings for the reface models -
except DX - can only be set using special
keyboard commands.
to change these settings, the specified key must be
pressed on the keyboard before turning the power on. i
would like to highlight some particularly important of these
combinations. on the dX you can reach these settings via
the [fUnction] button.
faCtorY set
the key c5 sets the instrument back to the factory settings
(factory reset). Unsecured data and settings will be lost.
the leds in the sections osc (cs), tYPe (cP), and waVe
(Yc) will flash to comfirm the operation. in the dX the
display displays "factory reset". the process works with
one hand.
auto power-off
By default all instruments are switched off after 30 minutes
of inactivity. if you want this function to be disabled, use
the key c2. while all other special functions can be
alternately switched on/off as described, the reactivation
of the "auto Power-off" routine requires the execution of
a factory reset.
speaker output
Using the key d2 you are able to mute the built-in speakers.
all other functions are explained in the manual.