Yamaha Raptor YFM7RSEZ, Owner'S Manual

Page: 41 / 154

4-23
4
TIP
Although the total number of clicks of a damping
force adjusting mechanism may not exactly match
the above specifications due to small differences in
production, the actual number of clicks always rep-
resents the entire adjusting range. To obtain a pre-
cise adjustment, it would be advisable to check the
number of clicks of each damping force adjusting
mechanism and to modify the specifications as
necessary.
WARNING
EWB00430
This shock absorber assembly contains highly
pressurized nitrogen gas. Read and under-
stand the following information before han-
dling the shock absorber assembly.
●
Do not tamper with or attempt to open the
cylinder assembly.
●
Do not subject the shock absorber assembly
to an open flame or other high heat source.
This may cause the unit to explode due to ex-
cessive gas pressure.
●
Do not deform or damage the cylinder in any
way. Cylinder damage will result in poor
damping performance.
●
Do not dispose of a damaged or worn out
shock absorber assembly yourself. Take the
shock absorber assembly to a Yamaha deal-
er for any service.
WARNING
EWB00011
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
16 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in direc-
tion (a)
U1AS10E0.book Page 23 Tuesday, February 10, 2009 9:33 AM