Toolbar
Reference Manual
TF Series
- 13 -
SCENE screen menu
Press the Menu key (
) from the Scene screen to display the following items.
METER screen
Displays the input and output level of all the channels, and allows you to select the metering
point (i.e., the point at which the level is detected).
1
Input metering point selection menu
Select the input level metering point from the menu.
PRE HPF
: After the head amp; before the HPF
PRE FADER
: Before the fader
POST ON
: After the [ON] key
2
Output metering point selection menu
Select the output level metering point from the menu.
PRE EQ
: Before the EQ
PRE FADER
: Before the fader
POST ON
: After the [ON] key
3
Peak Hold button
Turn this button on to hold the peak level for each level meter. Turn this button off to
remove the peak level that was being held. The Peak Hold on/off setting affects both
input and output channels.
1
Copy
Copies the selected Scene.
2
Cut
Cuts the selected Scene.
3
Paste
Pastes the copied or cut Scene to the Scene list.
4
Delete
Deletes the selected Scene.
ձ
ղ
ճ
մ
NOTE
You can assign the Peak Hold button to a [USER DEFINED KEY]. (
ձ
ղ
ճ
մ
յ
