Instrument an
d
control functions
4-10
4
EAU1234R
Han
d
le
b
ar switches
Left
Ri
g
ht
EAU12362
Pass switch “PASS”
Press this switch to flash the headlight.
TIP
When the dimmer switch is set
to “
”, the passing switch has no ef-
fect.
EAU85410
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
TIP
When the switch is set to low beam,
both headlights for low beam come on.
When the switch is set to high beam,
both headlights for high beam come
on.
EAU12461
Turn si
g
nal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12501
Horn switch “
”
Press this switch to sound the horn.
EAU68271
Start/En
g
ine stop switch “
/
/
”
To crank the engine with the starter,
set this switch to “
”, and then slide
the switch toward “
”. See page 6-2
for starting instructions prior to starting
the engine.
Set this switch to “
” to stop the en-
gine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
EAUN2210
Hazar
d
li
g
hts switch “
/OFF”
The hazard lights (simultaneous flash-
ing of all turn signal lights) are used in
case of an emergency, such as to warn
other drivers when your vehicle is
stopped where it might be a traffic haz-
ard.
Set this switch to “
” to turn on the
hazard lights. To turn off the hazard
lights, set the switch to “OFF”.
1. Pass switch “PASS”
2. Dimmer switch “
/
”
3. Horn switch “
”
4. Turn signal switch “
/
”
1. Start/Engine stop switch “
/
/
”
2. Hazard switch “
”
1
2
3
4
1
2
UB5L12E0.book Page 10 Wednesday, March 25, 2020 9:59 AM
