Yamaha R1 Series 2015, Service Manual

Page: 610 / 704

ABS (Anti-lock Brake System)
8-129
EAS30530
BASIC PROCESS FOR TROUBLESHOOTING
[A-1] Does only the ABS
warning light fail to
come on?
[A-2] Do all indicator lights
fail to come on?
[A-4] Only the ABS ECU
fails to communicate.
[A-5] ABS ECU and FI ECU
fail to communicate.
The wire harness is grounded
between the ABS ECU and the
meter assembly.
The meter assembly is defective.
The hydraulic unit assembly is
defective.
The main switch is defective.
The battery voltage is low.
The main fuse is blown.
The meter assembly is defective.
Yes
Yes
Yes
Yes
No
No
Return to [A].
Return to [A].
•
•
•
•
•
•
•
[A-3] The ABS warning light comes
on.
Connect the Yamaha
diagnostic tool, and then
execute functional diagnosis.
Can the tool communicate with
the ABS ECU? Return to [A].
Return to [A].
[B-2] Diagnose by the fault
code.
[B-3] Delete the fault codes.
Return to [A].
[C-1] Perform the final checks.
Were all of the final checks
completed normally?
Finished.
Yes
No
[A] Turn the main switch to “ON”,
and check the ABS warning
light.
Fails to
come on
Comes on
The ABS ECU fuse is blown.
The ABS ECU coupler is
disconnected.
•
•
The ABS solenoid fuse is blown.
•
The wire harness is defective.
•
The hydraulic unit assembly
is defective.
•
The connection with the Yamaha
diagnostic tool is defective.
•
The battery voltage is low.
•
Cannot
communicate
Can communicate
[B-1] Check for ABS fault
codes in the screen for the
Execute fault diagnosis.
Yamaha diagnostic tool.
Are fault codes displayed on
the screen?
No
Yes
(The ABS warning light
goes off when the light is
checked.)
The reaction force generated
during brake line routing
confirmation is incorrect. Refer to
“[C-1] FINAL CHECK”.
The brake hoses and brake
pipes are not connected
correctly.
•
The malfunction is not
corrected.
•
There is a break in the wire
harness between the ABS ECU
and the meter assembly.
•
The ABS warning light does
not go off when the light is
checked. Refer to “[C-1]
FINAL CHECK”.
Return to [A].